Great post/question.
I'm following to get the feedback as well.
I've done several full installs, but never something like this.
Pictures of those who have done similar installs would be great.
-
Hyundai Santa Cruz Owners Registry: Add Your Info Here!
Limited Bose AND Kicker Hideaway HS10??
OK, I haven't done it yet, but I was just wondering if anyone has run BOTH subs? Rather than getting into the "why" I ask if can focus on the IF it can be done. Please reserve the why for another conversation.
Is it as simple as running the power and ground for the HS10 then tapping the signal wires from the Bose? I mentioned this to a friend and he was like, "You gotta take into account the impedance." So after some research I found these diagrams from Crutchfield. See attached.
![Output device Font Audio equipment Automotive lighting Gadget]()
![Automotive lighting Font Audio equipment Auto part Parallel]()
I didn't think the OEM amp supplied power to the Kicker esp since non-Bose owners tap into the door speakers and things work fine. That's why I figured just going to the sub signal wires would be OK.
So what do y'all think? Do I need to wire them in series/parallel for it to work? Or should I just do the first option of tapping the signal wires to get this to work right?
Thanks in advance.
Is it as simple as running the power and ground for the HS10 then tapping the signal wires from the Bose? I mentioned this to a friend and he was like, "You gotta take into account the impedance." So after some research I found these diagrams from Crutchfield. See attached.
I didn't think the OEM amp supplied power to the Kicker esp since non-Bose owners tap into the door speakers and things work fine. That's why I figured just going to the sub signal wires would be OK.
So what do y'all think? Do I need to wire them in series/parallel for it to work? Or should I just do the first option of tapping the signal wires to get this to work right?
Thanks in advance.
