Hyundai Santa Cruz Forum banner
1 - 6 of 6 Posts

·
Registered
Joined
·
100 Posts
Mine leaks a little bit on two spots along the seam that closest to the roller. I think I know why. with the cover extended, the first slat of the cover closest to the box is at an angle going into the cover box. Since that slat is at an angle and not completely horizontal, it is not firmly pressing the rubber seal between the slats. I hope I’m explaining it correctly.
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top